Floor Graphics are adhesive-backed vinyl printed in full color on one side of 3 mil adhesive with a luster finish. Floor Graphics withstand wear from heavy foot traffic while remaining easily removable. They are easy to install, UL-approved slip resistant and can be scrubbed, cleaned, and waxed during routine maintenance.
Floor Graphics are a great solution to turn your floors into advertising space. Put them up as temporary signage. Rather than banners that need to be hung or supported by stakes, Floor Graphics stick to any flat surface. They are also designed with a silver backing that blocks out any underlying images, so they are great idea for updating your brand, logo, or name, and you can use them for special offers, events and more.
Our standard sizes, listed below, are the most popular in the industry:
• 2′ x 3′
• 2′ x 4′
• 2′ x 5.25′
• 3′ x 4′
• 3′ x 6′
• 3′ x 8′
• 4′ x 6′
• 4′ x 8′
• 4′ x 12′
• Contact Us for custom sizes up to 75 feet wide!
Vinyl Floor Graphic
The 4mil Vinyl Floor Graphic (Floor) comes with a 3 mil luster coating allowing you to use the floor graphic on most flat surfaces.
Full Color – 4/0
Full color on one side of the sheet. This option can reproduce the range of colors you see in a typical photograph out of the standard 4 printing colors: cyan, magenta, yellow, and black. Typical examples of this are magazine covers and high-end catalogs.
A 3mil luster lamination helps protect the decal’s design from the elements without taking away from the overall impact.
Standard printing turnaround on this product is 3-4 days from the time your proof is approved. Standard Turnaround includes ground shipping with an estimated shipment time of 3-5 days to the continental US. Expect your order in 6-9 days from the time your proof is approved.
This product comes ready to install with an adhesive backing.
Select a Quantity
Select a quantity or contact us for larger quantity orders.
In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file. If you are uploading PDF files created in Photoshop, please be sure all layers are flattened. We also accept.JPG (JPEG) file types, however PDF is the preferred format. Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results. • Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
• Use a minimum resolution of 300 dpi for image files.
• Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
• Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
• Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
• If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
Note: Because of the wide potential size range of our large format products, there are additional file setup considerations. Proofs are typically shown half size. For other details, please review the file setup section carefully. Due to material, all substrates may expand or shrink from batch to batch, which makes exact cuts very difficult. We do not recommend borders. If you would like borders, please make sure they are at least 2″ thick. We will not reprint if the borders are not exactly the same on all sides after cutting.
Graphic Design Service
Want our award-winning team to design it? Select Design them for me. in the product options.
Only logged in customers who have purchased this product may leave a review.