Description

Window Perf is an adhesive-backed, perforated synthetic substrate with full color printing on one side. It is designed to let you put your printed message on a window visible from the outside but still be able to see out from the inside. You can use it on architectural glass and side or rear automotive windows.

For automotive use, please check local regulations.

Marketing Tips

Window Perf is designed to let you put your printed message on a window visible from the outside but still be able to see out from the inside. You can use it on architectural glass or automotive glass. Your advertising doesn’t have to block your view to get the message out.

Size

Our standard sizes, listed below, are the most popular in the industry:

• 2′ x 3′
• 2′ x 4′
• 3′ x 4′
• 3′ x 5′
• 4′ x 4′
• Contact Us for custom sizes

3M Perforated Adhesive

Great for both outdoor and indoor use, this 50/50 perforated window film is designed to display a printed image viewed from the outside while still allowing people on the inside to see through the window. The adhesive is strong enough to hold the display in place without leaving excessive residue upon removal.

Check local laws before applying to a vehicle.

Full Color – 4/0

Full color on one side of the sheet. This option can reproduce the range of colors you see in a typical photograph out of the standard 4 printing colors: cyan, magenta, yellow, and black. Typical examples of this are magazine covers and high-end catalogs.

No Lamination

This product comes uncoated and is durable and long lasting.

Standard Turnaround

Standard printing turnaround on this product is 3-4 days from the time your proof is approved. Standard Turnaround includes ground shipping with an estimated shipment time of 3-5 days to the continental US. Expect your order in 6-9 days from the time your proof is approved.

Finishing

This product comes ready to install.

Select a Quantity

Select a quantity or contact us for larger quantity orders.

File Setup

In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file. If you are uploading PDF files created in Photoshop, please be sure all layers are flattened. We also accept.JPG (JPEG) file types, however PDF is the preferred format. Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results. • Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.

• Use a minimum resolution of 300 dpi for image files.
• Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
• Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
• Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
• If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.

Note: Because of the wide potential size range of our large format products, there are additional file setup considerations. Proofs are typically shown half size. For other details, please review the file setup section carefully. Due to material, all substrates may expand or shrink from batch to batch, which makes exact cuts very difficult. We do not recommend borders. If you would like borders, please make sure they are at least 2″ thick. We will not reprint if the borders are not exactly the same on all sides after cutting.

Graphic Design Service

Want our award-winning team to design it? Select Design them for me. in the product options.